This is a PnP oem quality harness for ALL single cab trucks and some cab plus/crew cab trucks that were not pre wired from the factory. If you are not sure if your truck is pre wired or not, simply pull down the panel covering your back wall and look for a large dark grey connector taped off. If you do not see this connector your truck is not pre wired. If your truck is pre wired at the back wall and there is no wiring at the overhead console, we also offer this missing wiring as a stand alone upgrade. Still no programming or additional parts needed. This last option is ONLY for trucks that have the wiring to the power sliding window motor but not the power slider switch.

There are no modules needed or programming required. You only need a rear window assembly with motor and an overhead console with the power slider window switch.

Due to where some of the wires must be routed along oem paths, this install is a bit more difficult because of limited space to move around. Still very manageable and straight forward. Detailed installation instructions will be provided to ensure a successful install of the harness.

Open your truck up with our new power sliding rear window harness upgrade and take advantage of special pre-order pricing!

Not specified, however this harness will also work with the 2015-2020 F150

Price is for HARNESS only. No rear slider, overhead console or truck will be supplied

You MUST select the correct trim/year of your truck. Harnesses are not interchangeable across the year range.