Our heated steering wheel harness is designed to enable this oem feature on trucks that did not come from the factory with this option. To enable this upgrade, a new clockspring and heat control module from Ford are required. This is an oem upgrade which, once enabled, will work and operate 100% oem.

Programming is required once all parts are installed to enable. Typically programming is carried out with FORScan.

Truck must also have the 8” touchscreen since the on/off button to power the heated steering wheel is a virtual touch button placed on the 8” screen once all programming is complete. See pic to the left for this button on the touch screen.

Installation instructions with all programming changes are included

This upgrade can be done with ANY oem heated steering wheel offered on the 2017-2021 F-250- F-550 Super Duties as well as the 2017 Raptor steering wheel with the heated option. Installation and programming is the same as it is with the 2015-2020 F-150.

Required Parts:

1. Clockspring: HL3Z-14A664-B if airbag has 2 connectors

   HC3Z-14A664-B if airbag has a single connector

2. Heat control module: DG9Z-14B561-A

3. Retainer pins: CU5Z-14A163-A (qty 3)

4. Your choice of heated steering wheel (many different part numbers. Refer to Ford)